Home > IT Solutions - Drive Duplication Drive Copier and Diagnostics > Hard Disk Drive Copy/Clone Solutions >

SuperCopier Desktop Economic Multiple Drive Duplicator Unit

supercopier desktop duplicator - multiple channel hard drive duplication, cloning, imaging, erase, and format unit with extreme speed, and with multiple session operations

SuperCopier Desktop - A cost-effective, multiple channel drive duplicator.

Alternative Views:

SuperCopier Desktop is an industrial, cost-effective hard drive duplicator unit. The unit is extremely efficient and fast. It is a multipurpose IT unit with the ability to clone multiple drives at the same time. The unit can be used for functions such as Cloning, Imaging, Deploy, Erase, and Drive Diagnostics of Storage Devices such as Hard Disk Drives, SSD, and USB flash drives. It supports SAS/SATA/USB/IDE drives and allows for cloning methods using bit by bit mirror image, Quick Copy of Partitions, Selective copy of files and folders, VHD copy, and Copy to Folder. It can be used to clone 1:7 SAS/SATA and 1:9 USB3.0 devices. The unit does not have any expansion capabilities.

Our Price: $5,400.00

Availability:: Usually Ships in 1 to 2 Weeks
Product Code: SCD-0002-00F

Qty:

Description

Technical Specs

Extended Information

The SuperCopier® Desktop Low Cost unit is an economic, multipurpose drive duplicator with multiple ports; enabling the user to clone, image, duplicate, and erase multiple drives at the same time extremely fast and very efficiently. The unit is industrial and durably built, using a desktop-style, with easy to use touchscreen icons. The unit supports hard disk drives, SSD, and USB Flash drives. The main application supports many modes of operations, such as:

1) Mirror mode: Bit by bit imaging.

2) Quick Copy: Advanced Smart Copy of Partitions.

3) VHD Copy: Clone image of a virtual drive.

4) Selective Capture of Files and Folders.

5) Copy to Folder: Copy all data files from a source drive into one folder on the target drives.

The application supports duplication of data from one source drive to multiple target drives, or from multiple source drives to multiple target drives. The application is updated to clone Windows 10, and it automatically converts between 512k to 4k formats (Physical and Logical). The unit has no expansion capabilities.

Some remark on off the shelf cloning and imaging application: There are many cloning and imaging stand alone applications, only a few are really working!

Some of the testimonials:

"The MediaClone SuperCopier Desktop unit works very well. The unit runs very fast in multiple session operations, and it is very easy to use. We have loaded many different kinds of partitions on the source drive, and the Quick Copy mode works very well cloning the source to many targets. The application supports GPT and MBR partitions with scaling and non-scaling, NTFS re-size works with different size targets, and the latest Windows 10 is very well supported.” Benny Potlog from Intel Israel

"For our purposes, being able to sanitize many drives swiftly is a serious need. We looked into several devices but they were usually made for single purposes that didn't match what we were looking for. The MediaClone SuperCopier has allowed us to speed up cleansing drives dramatically as well as clone drives. It's flexible and allows for many operations simultaneously. In the rare event of any issues, we have always received prompt support from MediaClone. The SuperCopier is very well constructed, simple to use, and reliable." Warren Smite from Prosoftnet Calabasas, CA

“We have searched for few solutions that could help us to destroy our data from retired storage and came across MediaClone SuperWiper solution. I must say, it saved us lots of time erasing individual disks so we have decided to add the Disk Duplicator solution to clone drives. IT Folks love to be able erase data with DoD formatting tool and also provide audit trail for our auditors. Great product and I would highly recommend it.” Les Janeczko Manager, IT Infrastructure Fuzion Analytics

Main Hardware Features:

- Case: Desktop, Industrial

- CPU: i7 with the Latest generation

- Display: 10" touchscreen, color LCD display

- 8 Channel HDD Open Tray: Easy to insert and plug tray that accommodates any size and shape of drives and storage devices; contains power status LED indicators.

- Hardware: Very high-quality, high performing components; some of the components are with military specifications.

- Hardware Upgrade: If the user needs to use more simultaneous sessions, some of the units can be upgraded at the time of purchasing, for an additional cost, to add a CPU with more cores.

- OS: Linux Ubuntu 64 bit

- Security: Linux OS (Linux is less targeted by malware).

- Application Updates: The application can easily be updated via a USB thumb drive and displays a special update application screen.

Hardware Specifications:

- RAM: 8GB DDR4 internal memory.

- Storage controller: SAS 2.0, 8 Channel LSI controller.

Hardware Supports:

- Source Ports: One SATA port and one USB3.0 port are set as source ports (these ports’ role cannot be changed by the user).

- Supports Storage Protocols and Interfaces: SAS, SATA, e-SATA enclosures, IDE, USB2.0, USB3.0, MMC, and M.2 NGFF (SATA).

- Supports Form Factors: 3.5", 2.5", ZIF, 1.8", Micro-SATA, Mini-SATA, and M.2 SATA storage devices.

- Cross Copy from Ports and Interfaces: The user can choose to clone from one type of port, storage protocol, and interface, and save it into a different port, storage protocol, and interface. The cross copy of data can be done between SAS/SATA/IDE/USB.

Application Settings:

- HPA/DCO Automatic Supports: The application has the ability to automatically open HPA and DCO areas and re-size the drive to its full native capacity in order to erase any “hidden data” (HPA/DCO are special areas on the drive that support this feature).

- Bad Sectors Handling: The user can select to skip bad sectors, skip a block of bad sectors, or abort the operation when it encounters bad sectors on the source drive.

- 48bit LBA Addressing: Supports drives with sizes up to 256TB.

Application Features:

- GUI: The application is built with large, very simple, and easy-to-navigate icons. In a few clicks, the user can set the operation, and it will quickly be up and running.

- Speed: Extremely fast operation- 100% bit by bit can be up to 29GB/min with SSD and 11GB/min with fast Hard Disk Drives.

Application's Main Operations:

- Clone: Mirror bit by bit (any OS), Quick Copy (NTFS, FAT, exFAT, EXT2-4, HFS+), Selective Capture (Files and Folders), VHD Copy, and Copy to Folder.

- Erase or Format drives

- Drive Diagnostics

Cloning/Duplication:

- Main Copy/Duplicate/Clone Application Features:

- Mirror Image: 100% bit by bit for any size of master and target drive with any OS. The source drive and the target drives need to be the same make and size if the user wants to boot from the target drives. The user can image a portion of the drive by adjusting the % of the bit by bit mirror imaging.

- Selective Capture enables the user to browse the source drive and select partitions, folders, and files to copy. It is supported by partitions that are mountable under Linux (NTFS, FAT, exFAT, HFS, EXT2-4).

- VHD Copy enables the user to copy VHD files from a source drive that contains multiple VHD files.

- Copy to Folder: Clone the entire drive and save it into one folder.

- Quick Copy/ Advanced Smart Copy mode: This is where the cloning and deploying process is done with a copy of file system.

-It supports source drives with FAT/NTFS/HFS+/EXT -2-3-4 file systems.

-Automatically scans for all the partitions on the source drive.

-Option to scale all partitions, or scale only selective partitions, by the user’s selection and choice.

-Option not to scale partitions.

-Scale down: If the size of the DATA on the source drive (not the size of the source drive!) will fit the target drive, then the quick copy will be completed.

-Flexibility in cloning mode: It can be 1:7, 2:6, 3:5, 4:4, and more modes with the use of USB3.0 to SATA adapters.

- Automatically formats and partitions the target drives: On-the-fly, while the duplication runs.

- Verification of the copied data:

-Built-in data transfer verification mode applies for all modes of copy.

-For 100% bit by bit copy: The user can select to add an optional HASH calculation value during the data transfer (MD5, SHA-1, SHA-2) as authentication and verification of the copied data. SHA-1 is the fastest mode and it almost adds not delays the total copy time. For extra precaution, the user can also enable the option to "HASH target drives and compare" which will run an additional read-pass over the target drives at the end of the copy, calculate the HASH value by reading the data from the target drives, and compare the HASH values to the one that was generated from the source drive. This extra step will add some extra time; for example, if running 100% bit by bit copy from 1TB source drive to 7 1TB target drives can take around 2h. “HASH target drives and compare” can add another hour to the total time.

Erase and Format Operation:

- Drive Erase Protocols: DoD 5220-22M, DoD Lite (total of 4 passes), Security Erase, Enhanced Security Erase, or User-Defined Final Data Filling Pattern and the number of erase iterations (all erase protocols are NIST 800-88 compliance).

- Drive Formats: NTFS, FAT, exFAT, HFS+, and EXT4.

Drive Diagnostics Operation:

- Drive Diagnostics test and S.M.A.R.T. drive tests: If the user intends to erase a drive for re-use purpose, it is recommended to run some "Health test" on the drive prior to the erase process. There are 4 available types of tests:

-Read-Verify- supported by all storage protocols.

-Short Test (2-5 minutes)- scans random areas on the drive.

-Extended Full Test (Can take hours)- scans the entire drive.

-Conveyance Test- identifies damage incurred during the transporting of the drive to evaluate the "health" condition of the drive prior to the erase operation (S.M.A.R.T. tests are only supported by SATA/SAS storage protocols).

- Logs and Erase Certification: The application generates extensive erase log-files and erase certifications (option to save to NIST 800-88 format) that are easy to export to USB flash drives. The user can add his company logo to the erase certification and also add additional info on the erase runs that will append to the certification.

Parallel Operations:

- Multiple Session Operations:

- Versatility with Multiple Cloning Sessions: The user can assign and select one source and many target ports into one session of cloning. Also, the user can have many sessions of cloning; each will have one source drive and at least one target drive. This gives the user more possibilities to use the unit in a very efficient way. The user can run multiple, simultaneous, parallel operations using any available ports. Also, the user can combine more than one port/storage device to run in the same sessions. In addition, the user can mix different types of operations, and each operation is set as a new independent session. An example of operations: Erase data from a drive that is connected to the first port, quick copy using drives connected to ports 2 and 3, and so on.

- Multiple Sessions Application Screen: All running sessions are displayed in one “Application Screen”. The “Application Screen” shows the name of the session, the operation of the session, the error or abortion flag, the progress completion bar, and the successful completion flag. The user can abort a session, tap on a session to monitor its real-time running progress, and get the specific detailed setting for that run. It is a very easy way to view, navigate, and control the sessions.

- Drive Detection Application Screen: All drives and storage devices that are connected to the unit will be scanned and displayed in one application screen called “The Detection Screen”. The user can tap on each drive to get the drives detailed info, perform a specific operation on that drive, like resizing it, as well as select it for the desired operation they are planning to use.

Ports:

- Native SAS: 8 Ports

- Native SATA: 9 Ports (with use of the unit’s e-SATA port).

- USB3.0/USB3.1: 10 Ports

- USB2.0: 1 Port

- HDMI port for external monitor.

- With the use of USB3.0 to SATA fast adapters in combination with the e-SATA port, the unit can support up to 15 SATA drives.

Power Characteristics:

- A built-in, universal, auto switching 700W UL/CE/PSE 110/220V power supply with an input voltage of 100-240V/50-60HZ.

Operating Environment:

- Temperature: 5°C - 55°C (40°F-130°F).

- Relative Humidity: 20-60% non-condensing.

Mechanical Characteristics:

- Base unit dimensions: 16.0” x 15.0” x 4.0” inch. (400 x 380 x 100 mm). A user will have to attach the display pad to the main unit.
- 8-channel open tray dimensions: 11”x 6”x 2” inch.
- Shipping dimensions:

- Box dimensions: 20” x 20” x 15” inch.

- Shipping box weight: 28.5 lbs

Included Items:

- 8 SAS/SATA 29 Pins, male to female power and data combo cables, with secure locking connection.

- Built in the US: The units are built and tested in the US.

- Warranty: One-year free warranty on the main unit (does not include warranty on accessories, adapters, and cables).

Features

Lower Cost, Standalone, Secure, No License Scheme, Drives Duplicator, Built with Extreme Performing Hardware, Heavy Duty, Easy to Use, and Very Flexible UI. Standalone hardware gives the user consistent performances and is the most secure solution when in combination with Linux OS. No licensing scheme makes the solution cost-effective. Lifetime free s/w updates and supports. The unit runs 24/7, 365 days of the year, with no failure.

Application Features:

- Visualizing of the source drive partitions and flexibility to move partitions on the target.

- Scaling NTFS, FAT32, and EXFAT partitions.

- One of the best NTFS scaling down apps.

- Copy/Erase Bitlocker encrypted partitions.

- Win8, Win10 support.

- Supports MBR and GPT partitioning.

- S.M.A.R.T. drive's diagnostics tests.

- Read back verify drive test.

- Remove ATA passwords*

- For NVMe Supports:

-Copy NVMe SSDs

-NVMe namespaces

-NVMe erase/format

* some drive models

Operation Highlights:

- Hot Pluggable Ports: Each of the unit’s ports is hot pluggable. When a session completes, the user can plug in another drive and select it to run a new operation.

- Scripting: Easy Scripting can be set and used for a repeat operation.

- Reporting: Detailed logs for drive duplication and drive erase sessions.

- SQL Erase Database: A collection of the erase logs, erase certificates, and drive information.

- Easy Export of Erase logs and the Erase database to a USB stick or share it over a network.

- Access/Control the unit remotely.

Example of a typical cloning operation:

For high volume:

SAS/SATA: clone 1 to 7 in one session.

SATA (by utilizing the eSATA port and using the 10 USB3.1 ports with SATA to USB adapters): clone 1 to 17 in one session.

For a variety of source drives:

Any combination of the ports up to 4 to 4 for SAS in 4 simultaneous sessions, and up to 9 to 9 for SATA in 9 simultaneous sessions.

Example of an erase operation, or drive diagnostics: Utilize any of the unit’s ports to plug in a drive and run it in separate sessions (besides designated source ports 1 SAS/SATA and 1 USB).