|
|
|
|
|
|
|
|
|
|
|
|
|
USB3.0 to e-SATA adapter at speed of 3Gbs.
convert USB3.0 port to e-SATA port
|
29 Pin SATA male cable split into 7pin SATA data cable and 15pin SATA power cable.
This cable can be used with IDE to SATA adapter solutions, or with e-SATA enclosures.
|
External Lithium Polymer battery to be used with 7" Mini units. The battery is very compcat, lightweight. It has a flat discharge curved, and zero self-discharge. It can
protect against overcharge, over current, over temperature and short
circuit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
USB3.0 to SATA drive adapter, extreme fast with top speed of 20GB/min, transfer rate up to 5Bps, 4TB compatible.
|
Fiber Channel 2 Drives Option expanding SuperCopier and Superwiper Desktop PRO gen 2 Models.
The option includes: FC drive's adapters, LC to LC optics cables, FC transceivers, and a 4Gigbit/s dual ports FC controller (installed in the main unit).
|
SCSI 3 Drives Option expanding SuperCopier and Superwiper Desktop PRO gen 2 Models or 8" T3 Models
The option includes all the cables and adapters to connect 3 SCSI drives to the main unit for purpose of drive erase or drive data duplication
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1394 PCIE Expansion option: 1394B (2 ports) and 1394A ( one port)
Include 1394A and 1393B cables
|
10Gigabit/s Network Option with dual port
|
15 Pin SATA male power cable split into 4 Pin LP-4 and 4 Pin FDD female conncetors.
This cable can be used with IDE to SATA adapter solutions, or with e-SATA enclosures.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A high speed USB 3.0 MMC cards reader that can be used on any of the MediaClone line of products.
For the Computer Forensic line of products, it can be used to capture Forensic Images from multimedia memory cards in a secure environment.
|
mSATA to SATA adapter
|
Micro-SATA(9p pwr+ 7p data) Female to SATA Male (15p power+7p data) adapter. The adapter pluggs direct into a Micro-SATA drives
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
M.2 (NGFF) SSD to SATA adapter. (SATA protocols only)
Supports up to 5 different sizes of SSD. Supports B keys SSD.
|
M.2 NGFF (SATA protocol) adapter connect to a PC via a USB3.0 port
Support M.2(NGFF) SATA3 KEY B+M SS and support 3 sizes SSD: type 2242,2260,2280
|
SAS/SATA male to female 29 pin external extension cable connection the SAS/SATA hard disk drive to the main SuperImger Unit. The cable is 25cm long and with thumb screws to secure the cable to the main unit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SATA power and data special cable for 7" mini units
|
IDE to SATA adapter. Plug IDE drives into SATA ports. Include cables and adapter, supports IDE 2.5" and 3.5"
|
e-SATA kit:
e-SATA to SATA long nose data cable to be plugged in the fron panel e-SATA port of the main Desktop unit.
SATA split power cable, enables the user to power the drive from the SAS/SATA port
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NVMe External
Adapter supporing NVMe PCIe storage controller using MediaClone NVMe units withe U.2 port:
U.2 (SFF-8639) to M.2 NVMe slot (size 42mm to 110mm) and to
PCIE x4 NVMe slot (to plug PCIE NVMe storage cards).
The adapter plugs into the NVMe SFF-8639 Extension cable
which plug into MediaClone NVMe main unit’s NVMe port
|
NVMe M.2 to USB3.0 External
Adapter
Enable the user to capture, image, copy or erase NVMe SSD using any MediaClone products with the use of USB3.0 port. Speed is limited by the USB3.0 port and the SSD speed
|
Forensic remote data capture from a "Suspect" un-opened laptop or from "Suspect" un-opened computer, via 1Gigabit Ethernet port, or USB3.0 port
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NVMe KIT: An add-on port using the unit's TB3.0 port and the TB 3.0 Expansion Box
It supports M.2 and U.2 (SFF-8639) NVMe SSD.
For PCIE SSD, the user can plug it direct into the PCIE Slot inside the TB3.0 expansion box.
|
Panasonic Adapter for connecting CF-30 CF-19 CF-74 CF-52 CF-K30JG001 drive caddie to SuperImager/SuperWiper/SuperCopier units
|
Dell 5404 Tough Notebook to SATA Adapter.
Connect the Notebook drive caddie directly to the SuperCopier unit for cloning and erase
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Mac Capture KIT intended to capture data from Macbooks laptops and Mac PC via the SuperImager Thunderbolt 3.0 or Ethernet ports. Support for Mac with T1/T2 chip: With the use of the Thunderbolt to PCIe Expansion box with 1394 controller. Support for Mac with M1/M2 chips: With the use of 1 Gigabit/s to USBc adapter, Rj45 crossover cable, and with a MediaClone remote capture utility.
|
Cooling Fans for Desktop unit, with NVMe ports.
The fans seat on top of the drive's tray.
NVMe drives can get very hot and they need a lot of cooling to get the best performances.
|
Add 10Gigabit/s Network port to T3 units by using Thunderbolt 3.0 to 10GbeE Adapter
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The USB3.0 to SATA Adapter - 4 Channel kit: Convert USB3.0 ports to SATA port at a very high speed. Connect more SATA hard drive to the main SuperImager, SuperWiper, SuperCopier unit to perform Forensic Imaging, Hard Drive Data Erase, Hard Drive Data Duplication. (Supported by Linux)
|
Thunderbolt 3.0 to PCIE 3.0 Expansion Box (4 lane PCIE 3.0)
Expand the MediaClone T3, XL, Desktop units to support more interfaces.
|
Hard Case on Wheels with customized foam, lid organizer. It fits the 8" Field units and the Field Kit accessories.
The case can be use as a carry on airplane
|
|
|
