Home > Digital Computer Forensic Investigation Imaging units & Platforms
Choose a sub category:
Dgitial Forensic Third-Party Software Digital Forensic Kits and Platforms - Field Labs Digital Forensic Lab Units - SuperImager Plus SAS SATA NVMe USB
Digital Forensic Portable Rugged Field Units - on-the-go labs Portable Digital Forensic Imaging and Investigation Units





MediaClone was the first company to design a line of products that supports simultaneous and independent multiple sessions of drive imaging long before competitors adopted this idea. Most of them still have some limitations of use when it comes to multi-session, and that is because low-performing hardware cannot support the bandwidth needed to perform in good speed multiple imaging, including 4 HASH values, keyword search, compression, and encryption on the fly. (Most of them use Embedded Processors to save cost).

SuperImager Plus line of products is the only one that uses total bandwidth of 40Gigabit/s of Thunderbolt 3.0/4.0 port to support legacy drives, add-on storage interfaces, and connectivity to 10Gigabit/s networks.

SuperImager Plus line of products is the only one used for Forensic Imaging, Cellphone Data Extraction, and Full Forensic Analysis performed on the same unit.

SuperImager Plus line of products is the only one that can run MVMe SSD at 200GB/min and supports M.2, U.2, and PCIe NVMe SSD. Most of the other solutions are limited to NVMe M.2 ports.

For Field Operation a Complete Digital Forensic Investigation Portable Units: Consolidate many tools in one easy-to-carry unit and with the best performance (better than laptops). Digital Forensics Field data capture and imaging need speed - time is crucial; there is no time to extract data from bad sectors! The field units combine with a very fast and easy-to-use forensic imaging application (Linux) with some of those features: Full Imaging (Mirror, DD, E01/EX01, Mix DD/E01, AFF4), Single Partition Imaging, Selective Capture of Files and Folders (Triage). Also, run Virtual Drive Emulator to capture crucial files, Remote Capture from unopened laptops(Intel, Mac), Quick Keyword search before runing th ecapture or while doing the data capture, simultaneously calculate 4 HASH values, Encryption, Decryption, and run Drive's Diagnostic Tests with supports for drives encrypted with BitLocker and SED.
Also, support for automatic RAID detection and reconstructions (DDF, mdadm) and hardware RAID controller like LSI, HP, DELl and more.

As a Platform: Cellphones/Tablets Physical Data Extraction, Full computer forensic analysis, Forensic Triage Data Collections, network analysis, and more. The units are extremely fast, running with full compression and utilizing CPU cores and threads in multiple sessions. The units are configured with a Dual Open OS. (Linux for Forensic Imaging and Windows for Data Analyis and Cellphone extraction). For data recovery needs, the user can install the Linux R2 Studio Forensic suite, considred one of the best software to extract data from bad sectores when there is a need of balancing between data saved vs time of the data extracion.

For Lab use: Heavy Duty models are available, with multiple drives, mixed media for multiple simultaneous imaging, and network up-loaders. Some models have 8/16/24/40 SAS/SATA ports and 8 NVMe ports with 10GbE ports.

The SuperImager Plus Forensic units and the application was tested for almost 2 years and validated by the DC3 Defense Cyber Crime Lab Center

Click here to download What make SuperImager Forensic line of products different from other competitors
Click here to download a Quick Compare of the SuperImager Plus Forensic Features
Also visit our website that dedicated to Digital Forensic : www.SuperImager.com
MediaClone - SuperImager Plus Forensic Line of Products
Unit CPU SAS/
SATA ports
only SATA ports e-SATA generic ports USB3.2 ports TB3/4 ports NVMe ports (U.2) Net-
work
Expansion Remarks


Har












7" Mini
i7 Mobile n/a 3 n/a 4 n/a n/a 1GbE No
8" T4
SAS/SATA
Portable
i7 4
1 8 1 1* 1GbE Included TB3 to PCIE box Include via TB box: NVMe(U.2/M.2). Options: SCSI, FC, 10GbE, 4 NVMe M.2 External ports
8"
3 NVMe
& 7 SATA/SAS
Portable
i7 4* 2 1 8 1 3* 1GbE Included TB3 to PCIE box TB Box included with 4 SAS ports and one U.2/M.2 NVMe port
8"
5 NVMe
& 6 SATA/SAS
Portable
i7 4* 0 2 8 1 4* 1GbE Included TB3 to PCIE box TB Box included 4 SAS ports and one U.2/ M.2 NVMe port
15.6"
Rugged
Portable
Complete
Lab
i7 13 Gen 4
1 8 2 4 10GbE Options: Add 2 more 10GbE ports with TB3.0 adapters
12"
Rugged
Portable with TB
port
i7 4
1 4 1 1 1GbE Yes Options via TB3 port and optional TB3 Expansion Box: more SAS, NVMe, SCSI, FC, 1394, 10GbE
12"
Rugged
Portable
Mix SATA
NVMe with
TB port
i7 n/a 2 1 4 1 3* 1GbE Yes Options via TB3 port and optional TB3 Expansion Box: more SAS, NVMe, SCSI, FC, 1394, 10GbE
Desktop
XL (customized)
i9 8
1 8 2 0 1GbE Yes 10GbE, FC, SCSI, 1394, 8 SAS
Desktop 8
SAS/SATA
i7 8
1 8 0 0 1GbE No Include one U.2 NVMe port
Desktop 8
NVMe ports
i9 n/a
1 8 2 8 10GbE No Supports both U.2/M.2 NVMe
Desktop 16
SAS/SATA
i9 16 1 8 0 0 10GbE No Main unit with 8 SAS/SATA ports, and with one 8 ports cable-less SAS/SATA Expansion
Desktop Supreme
16 SAS/SATA
+ 4 U.2
i9 16 1 8 0 4 2 of
10GbE
No Main unit with 8 SAS/SATA port, 4 U.2 4x, 2 10GbE, one 8 ports cable-less SAS/SATA Expansion Boxes
Desktop Supreme2
12 SAS/SATA
+ 4 U.2
i9 12 1 8 2 4 2 of
10GbE
No Main unit with 8 SAS/SATA port, 4 U.2 4x, 2 10GbE, one 8 ports cable-less SAS/SATA Expansion Boxes, 2 TB4.0 ports, optional 8 add-on M.2 NVMe external ports
Desktop
XLE 40
SAS/SATA
i9 40
1 10 0 0 10GbE No Main unit with 8 SAS/SATA ports with two 16 ports cable-less SAS/SATA Expansion Boxes
Desktop
XLE 24
SAS/SATA
i9 24
1 10 0 0 10GbE No Main unit with 8 SAS/SATA ports and with one 16 ports cable-less SAS/SATA Expansion Boxes
Desktop 4
NVME & 4
SATA/SAS
Mix ports
i7 4
1 8 0 4 1GbE No Supporing U.2 and M.2 8GB/s Bandwidth
Desktop 4
NVME & 4
SATA/SAS
XL + 2 10GbE
i9 4 1 8 4 2 of
10GbE
No Supporing U.2 and M.2 8GB/s Bandwidth
Desktop
20 USB ports +
4 SATA
i7 0 4 1 20 1 0 1GbE No
* -Via Expansion

Smartphones data extraction supports:
MediaClone new release of SuperImager Forensic application that supports fast and multiple cellphone logical data extractions
  • The SuperImager application supports simultaneous and independent Multiple Logical Data Extraction Sessions from many different kinds of cellphones.
  • Supports Android and iPhones cellphones.
The Units Robust Hardware:
  • Dedicated 10 USB3.2 Ports with maximum bandwidth to simultaneously extract date from multiple smartphones.
  • Enhance data capture and extractions performances with a robust hardware using the latest i7/i9 Intel CPU.
  • Fast Performing Hardware utilizing utlizing PCIe 4.0 bus and DDR5 Memory.
  • Built-in fast "Write-Blocking" hardware.
  • Sort By:
    Page of 3
    SuperImager Plus Portable Rugged Forensic lab - 15.6" LCD display and 4 SAS/SATA, 4  U.2 NVMe , TB4, and 10 Gigabit Ethernet SuperImager Plus 12" NVMe SATA Rugged Portable Forensic Field Unit - 12" Touchscreen color LCD display and SATA-3, NVMe and USB3.1 and Thunderbolt 3.0 SuperImager Plus 12" Rugged Forensic Field Unit - 12" Touchscreen color LCD display and SAS/SATA-3 and USB3.0 and Thunderbolt 3.0
    The SuperImager Plus 15.6 Complete Rugged Portable Forensic Lab with 10GbE port is a compact, easy-to-carry, and extremely fast investigation unit. It is built with the most performing hardware enabled to carry multiple forensic imaging and full forensic analysis (i7 CPU, 4 native NVMe U.2 ports, 4 SAS/SATA ports, 10 Gigabit/s Ethernet port, 2 Thunderbolt 4.0 ports, , 8 USB3.2, one e-SATA port 2 speakers and audio ports, a large 15.6 color LCD, and a fast Write-Blocking hardware). Forensic imaging speed can reach 32.7GB/min for SATA drives and 189.3GB/min for NVMe SSD. Also, the unit enables the user to run Simultaneous logical extraction from many cellphones. SuperImager Plus 12" 2 NVMe 2 SATA Rugged, Portable Forensic Imager, and a Complete Forensic investigation Field unit with Thunderbolt 3.0 port is a compact, easy to carry, and extremely fast hardware unit. The unit is built with the latest generation of i7, 2 native NVMe U.2 ports, 2 SATA ports, one Thunderbolt 4.0 port, 4 USB3.2 Gen2 ports, one e-SATA port, and 1 Gigabit/s Ethernet port. The unit is configured with dual boot OS, running efficient data capturing under Linux, and uses Windows 11 to perform a full analysis, including simultaneous logical extraction of data from cellphones. It supports forensic imaging of multiple and mixed media drives running simultaneously, in parallel sessions, with an extremely high transfer rate, 32.7GB/min for SATA drives and 187GB/min for NVMe SSD. SuperImager Plus 12” Rugged Digital Forensic Unit built with the latest generation of i7 CPU, 4 SAS/SATA ports, Thunderbolt 3.0 port, 4 USB3.2 ports, e-SATA ports, 2 generic USB2.0 ports, and 1Gigabit/s Ethernet port. The unit is configured with Dual Open OS. Under Linux, the user can run simultaneous parallel independent forensic imaging with 4 HASH values, encryption, compression, and keyword search all on the fly, with a speed that can exceed 37GB/min for SAS/SATA and 187GB/min for NVMe. As a platform using Windows 11 the user can run a Forensic analysis application, or cellphone data extraction application, and more. Utilizing the fast Thunderbolt port (40 Gigabit/s) and the optional Expansion Box with different storage controllers to capture data from NVMe, FC, and SCSI or connect to a 10 Gigabit/s network.
    SuperImager Plus 8"  T3 Field Forensic Complete Kit with 8"  Touchscreen color LCD display and SAS/SATA-3 and USB3.0 and i7 CPU SuperImager Plus 8"  NVMe + SATA mix  Forensic Field Unit - 8" Touchscreen color LCD display and 7 SATA/SAS ports, 3 NVMe ports, 1 Thunderbolt 3.0 port SuperImager Plus 8"  NVMe + SATA/SAS mix  Forensic Field Unit - 8" Touchscreen color LCD display and 5 SATA/SAS ports, 5 NVMe ports, 1 Thunderbolt 3.0 port
    Portable Forensic Imaging Unit with a Complete Kit; includes:
    a) The SuperImager Plus 8” T3 unit with 4 SAS/SATA ports, 7 USB3.2 ports, and one Thunderbolt 3.0/USBC port and other unit's supplied accessories
    b) Thunderbolt 3.0 Expansion Box with U.2 to PCIe NVMe controllers and U.2 to M.2 NVMe adapter.
    c) Remote Capture KIT
    d) Thunderbolt/Mac KIT
    e) 1394 KIT
    f) SCSI KIT
    g) USB3.2/TB4 to NVMe (u.2 and M.2) external 2 fast adapters
    h) Durable rolling case, customized foam, with a multiple compartment organizer on the inside of the lid.
    i) Accessories, such as adapters and cables.
    Forensic Imager Portable unit with 3 NVMe and 7 SATA/SAS ports. It is portable, compact, easy to carry, and extremely fast (mirror image of NVMe can reach 187GB/min). The unit is built with 2 U.2 NVMe ports, 2 SATA3 ports, 7 USB3.2 ports, one Thunderbolt 3.0 port, and supplied with a Thunderbolt 3.0 Expansion box with 4 SAS ports controller + one U.2/M.2 NVMe controller. It supports simultaneous forensic imaging of multiple drives in parallel operations. It is configured with dual OS, under Linux running clean running efficient data capturing from HDD and SSD and cellphone logical data extraction. It uses Windows 11 for complete Forensic Analysis, running EnCase, Nuix, and Axiom applications. NVMe Portable Forensic Imaging Field unit with 5 NVMe and 5 SATA/SAS ports. Portable, compact, easy to carry, and extremely fast (above 100GB/min). The unit is built with 4 NVMe U.2 ports, two e-SATA ports, 7 USB 3.2 ports, one Thunderbolt 3.0 port, and is supplied with a Thunderbolt 3.0 Expansion box with 4 SAS ports controller and one U.2 and M.2 NVMe PCIE controller. Imaging at extremely high transfer rate, 187GB/min for NVMe SSD and 31GB/min for SATA SSD. The unit is configured with dual OS, running data capturing under Linux, and uses Windows 11 for Forensic Analysis, Cellphone Extraction, and more.